HTML datasheet archive (search documentation on electronic components) Search datasheet (1.687.043 components)
Search field

Datasheet: WSH41FC-XPAN1 (Winson Semiconductor Corp.)

Hall Effect Sensor IC with Complementary Output Drivers and Frequency Generator

 

Download: PDF   ZIP
Winson Semiconductor Corp.
WSH41FC
Winson reserves the right to make changes to improve reliability or manufacturability.
Hall Effect Sensor IC with Complementary Output
Drivers and Frequency Generator
Features:
Operate from 2.8V to 20V supply voltage.
On-chip Hall sensor.
Internal bandgap regulator allows temperature compensated operations and a
wide operating voltage range.
High output sinking capability up to 400mA for driving large load.
Lower current change rate reduces the peak output voltages during switching.
Available in rugged low profile SOT-25 , SIP-4L,SIP-5L packages.
Built-in
FG
output.
Built-in protection diode for reverse power supply fault.
General Description:
WSH41FC is designed to integrate Hall sensor with complementary output
drivers and frequency generator together on the same chip, it is suitable for speed
measurement, revolution counting, positioning, and DC brushless motors. It includes
a temperature compensated voltage regulator, a differential amplifier, a Hysteresis
controller, two open-collector output drivers capable of sinking 400mA current load
and an open-collector frequency generator capable of sinking 10mA current load. An
on-chip protection diode is implemented to prevent reverse power fault.
The temperature-dependent bias increases the supply voltage of the hall plates
and adjusts the switching points to the decreasing induction of magnets at higher
temperatures. Subsequently, the open collector output switches to the appropriate state.
WSH41FC are rated for operation over temperature range from ­20° C to125°C and
voltage ranges from 2.8V to 20V.
In
SOT-25
package, the built-in FG function can save fan system a lot of cost. It is a
very economical solution when fan system need FG signal.
©Winson, 2003 Jan
WSH41FC
Winson reserves the right to make changes to improve reliability or manufacturability.
Name
P/I/O
Pin#
Description
VDD
P
Positive Power Supply
Vss
P
Ground
FG
O
Frequency Generator
OUT2
O
Output Pin 2
OUT1
O
Output Pin 1
Name
P/I/O
Pin#
Description
Vcc
P
Positive Power Supply
OUT1
O
Output Pin #1
OUT2
O
Output Pin #2
Vss
P
Ground
Name
P/I/O
Pin#
Description
Vcc
P
Positive Power Supply
OUT1
O
Output Pin #1
OUT2
O
Output Pin #2
FG
O
Frequency Generator
Vss
P
Ground
Supply Voltage
Vcc --------------------------
20V
Output / FG breakdown Voltage Vout/Vfg --------------------- 25V
Magnetic flux density
B
--------------------------
Unlimited
Reverse Protection Voltage
Vr --------------------------
20V
Output Current continuous
Ic
--------------------------
300mA
Hold current Ih ------------------------ 400mA
Peak current Ip ------------------------- 800mA
FG ON Current (continuous) If -------------------------- 20mA
Operating Temperature Range
Ta --------------------------
(-20°C to +125°C)
Storage Temperature Range
Ts --------------------------
(-65°C to +150°C)
Package Power Dissipation
Pd --------------------------
350mw for SOT-25
500mw for SIP-4L
SIP-5L
©Winson, 2003 Jan
WSH41FC
Winson reserves the right to make changes to improve reliability or manufacturability.
(T=+25°C, Vcc=2.8V to 20V)
Characteristic
Symbol Test Conditions
Min
Typ
Max Units
Supply Voltage
Vcc
V
Output Saturation
Voltage
Vout(sat) Vcc=20V, Ic=200mA
B > Bop
V
FG Saturation
Voltage
Vfg(sat) Vcc=20V, If=10mA
B > Bop
V
Output Leakage
Current
Ileakage Vcc=20V, B < Brp
<
UA
Supply Current
Isupply Vcc=20V, Output &
FG Open
MA
Output / FG Rising
Time
Tr
Vcc=12V, RL=820
CL=20Pf
3.0
Us
Output / FG Falling
Time
Tf
Vcc=12V, RL=820
CL=20Pf
Us
Output / FG Time
Differential
t
Vcc=12V, RL=820
CL=20Pf
Us
©Winson, 2003 Jan
WSH41FC
Winson reserves the right to make changes to improve reliability or manufacturability.
Characteristics
Symbol
Quantity
Ta= -20°C to +90°C
Min Typ. Max
Unit
Operate Point
Bop
Grade A
Grade B
Grade C
30 50
40
70
70 120
Gauss
Release Point
Brp
Grade A
Grade B
Grade C
-50 -30
-70 -40
-120 -70
Gauss
Hysteresis Window
Bop-Brp
40 150 Gauss
SIP- 4L: WSH41FC-XPA
N
Elec. Grade
SIP- 5L: WSH41FC-XPC
N
SIP-4L & SIP-5L:
SOT-25: WSH41FC-XPD
N
1: A Grade (50 Gauss)
2: B Grade (70 Gauss)
3: C Grade (120 Gauss)
Elec. Grade SOT-25:
N: No-Lead process
1: A Grade (50 Gauss)
2: B Grade (70 Gauss)
©Winson, 2003 Jan
WSH41FC
Winson reserves the right to make changes to improve reliability or manufacturability.
SIP-4L
SIP-5L
©Winson, 2003 Jan
© 2018 • ICSheet
Contact form
Main page