HTML datasheet archive (search documentation on electronic components) Search datasheet (1.687.043 components)
Search field

Datasheet: HDU200-A-T050DI (Total Power International)

DC-DC CONVERTER 19Ў± COMPATIBLE EUROCARD TRIPLE OUTPUT 200 WATTS SWITCHING MODE POWER SUPPLIES HDU200 Series

 

Download: PDF   ZIP
Total Power International
DC-DC CONVERTER 19" COMPATIBLE EUROCARD TRIPLE OUTPUT
200 WATTS SWITCHING MODE POWER SUPPLIES HDU200 SERIES



FEATURES:
12/24/48VDC 2:1 INPUT RANGE
19" COMPATIBLE EUROCARD FORMAT
EMI MEET CISPR PUB. 22 & FCC CLASS A
MEET THE SAFETY STANDARDS
CE MARKING COMPLIANCE
6U X 12HP X 160MM VMEbus STANDARD
SPECIFICATION
INPUT SPECIFICATION
Input Voltage: Three 2:1 ranges option.
A Range: 9-18Vdc nominal 12Vdc.
B Range: 18-36Vdc nominal 24Vdc.
C Range: 36-72Vdc nominal 48Vdc.
Input Connector: 2pcs X DIN 41612 at rear.
Input Current: @FL @NL
HDU200-A: 23.0A 0.40A
HDU200-B: 11.3A 0.21A
HDU200-C: 5.0A 0.10A
Dielectric Withstand: Meet IEC950.
EMI: Meet CISPR PUB. 22 & FCC Class A.
Power-on Indicator: LED at front panel.
Power OK Signal: Installed.
Remote (Logic) Inhibit: Installed.
Reflected Ripple Current: Typ. 28mV pk-pk.
OUTPUT SPECIFICATION
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Output Wattage: Typ. 200 Watts for HDU200.
Output Connector: 2pcs X DIN 41612 at rear.
Output Indicator: LEDs installed at front panel
for all outputs.
Line Regulation: Typ. 0.2%.
Load Regulation: Main VO1 typ. 1.0%.
Aux. VO2 typ. 2.0%. (M.A.)
Aux. VO3 typ. 2-3.0%. (P.R.)
Noise & Ripple: Typ. 120mV peak to peak.
OVP: Built-in at main VO1 and VO2 (auto-recovery).
Adjustability: Available at main output VO1 and
Aux. output VO2 (Mag. Amp.).
Remote Sense: Available at VO1 only.
Overload Protection (OLP): Fully protected against
output overload & short circuit. Typ. 120-140%.
Consult the factory for OLP setting.
GENERAL SPECIFICATION
Efficiency: Typ. 71.0-73.0%
Switching Frequency: Typ. 48K Hz.
Circuit Topology: Push-pull circuit.
Transient Response: Typ. 0.5mS following a 25%
load change.
Power Density: 1.2 Watts / Cubic Inch.
Operating Temperature: 0 to +50C at full load.
Storage Temperature: -20 to +85C.
Temperature Coefficient: Typ. 0.04% /C.
Cooling: Free air convection.
Construction: 12HP(TE)x6Ux160mm 19" compatible
Eurocard VMEbus standard.
TOTAL POWER INT'L
OUTPUT VOLTAGE/CURRENT RATINGS CHART

MECHANICAL DIMENSIONS:
MM [INCHES]
WEIGHT: 2.1kg (4.63 lb.)

TRIPLE OUTPUT
INPUT RANGE
OUTPUT VO1 @# OUTPUT VO2 @ OUTPUT
VO3
MDEL NO.
Vdc
Min. Typ. Volt. Max. Min. Typ. Volt. Max. Min. Typ. Volt. Max.
HDU200-A or B or C-T033EI
A: 9-18,B: 18-36,C: 36-72
6A 25A 3.3V 30A 0A 16A 5V 20A 0A 1A 12V 1.2A
HDU200-A or B or C-T033EK
A: 9-18,B: 18-36,C: 36-72
6A 25A 3.3V 30A 0A 16A 5V 20A 0A 1A 15V 1.2A
HDU200-A or B or C-T033EM A: 9-18,B: 18-36,C: 36-72
6A 25A 3.3V 30A 0A 15A 5V 18A 0A 1A 24V 1.0A
HDU200-A or B or C-T033II
A: 9-18,B: 18-36,C: 36-72
6A 25A 3.3V 30A 0A
7A 12V 9A 0A 1A 12V 1.2A
HDU200-A or B or C-T050DI
A: 9-18,B: 18-36,C: 36-72
4A 20A 5.0V 25A 0A 20A 3.3V 25A 0A 1A 12V 1.2A
HDU200-A or B or C-T050II
(HDU200-A or B or C-32)
A: 9-18,B: 18-36,C: 36-72
4A 20A 5.0V 25A 0A
7A 12V 9A 0A 1A 12V 1.2A
HDU200-A or B or C-T050KK A: 9-18,B: 18-36,C: 36-72
4A 20A 5.0V 25A 0A
6A 15V 8A 0A 1A 15V 1.2A
HDU200-A or B or C-T050MI
A: 9-18,B: 18-36,C: 36-72
4A 20A 5.0V 25A 0A 3.5A 24V 4.5A 0A 1A 12V 1.2A
Symbol: " " OVP built-in. "@" Adjustable. "" Installed with Post Regulator. "" Couple filter inductor. "" Floating ( or isolated) output.
"" Magnetic Amplifier. "#" Remote sensing.
INPUT & OUTPUT CONNECTORS PIN ASSIGNMENTS
DC INPUT
TRIPLE OUTPUT
ASSORTED SIGNAL
ASSIGNMENT +Vin -Vin G
VO1
VO2 VO3
DC COM
LOG. INH. SYS Rest
+S
-S
POWER
FAIL
Pin & CNTR. P1-28 P1-30 P1-32 P2-4,6,8,10 P2-28,30 P2-16 P2-18,20,22,24,26
P1-8
P1-6
P2-14 P2-32 P1-4
Mating connector: DIN41612-H15 Female
© 2019 • ICSheet
Contact form
Main page