
Solder tail
for IC's with staggered double row Dual-in-line type pin
patterns. (e.g. NEC, etc...).
Double row staggered strips will also accommodate single-in-
line zig-zag memory packages on high density boards.
Display sockets
Partially equipped DIL and staggered strips: 4-finger standard
Quad-in-line and Display sockets: 6-finger low force
Replace 9x with required plating code, e.g. 410-9x-214-10-001
for a 5
110-xx-314-10-002 fig. 2
110-xx-316-10-003 fig. 3
page 50
shown
110-93-064-01-505
110-97-064-01-505
110-99-064-01-505
nominal row distance can also be
inserted
Important: Quad-in-line sockets
require a PCB drilling pattern
with 2.54 mm centerline distance
410-xx-214-10-002 right
410-xx-216-10-001 left
410-xx-216-10-002 right
410-xx-220-10-001 left
410-xx-220-10-002 right
410-xx-224-10-001 left
410-xx-224-10-002 right
410-xx-228-10-001 left
410-xx-228-10-002 right
Not stackable
510-97-010-01-504101
510-99-010-01-783101
510-97-018-01-504101 Fig. 2
510-99-018-01-783101
displays (1 or 2 digits)
right
left