HTML datasheet archive (search documentation on electronic components) Search datasheet (1.687.043 components)
Search field

Datasheet: NC513/12 (Noise/Com)

Bite Module

 

Download: PDF   ZIP
 
nc500/500sm series
200 kHz to 5 GHz
NOISE MODULES
FOR BITE
General Specifications:
Output
White Gaussian noise
Minimum power
31 dB ENR
output
(-143 dBm/Hz)
51 dB ENR
(-123 dBm/Hz)
Crest factor
5:1
Supply current
0.2 to 5 mA
(NC500 Series)
10 to 20 mA
(NC510 Series)
Temperature coefficient 0.01 dB/C
Supply sensitivity
0.1 dB/%
V
Operating
0C to +70C
temperature
(surface mount)
-55C to 85C (drop-in)
Storage temperature
-65 to +150C
Packaging
Drop-in or
surface mount
Power
+12, +15V or +28V
Absolute maximums
+30V for +15V models
input voltage
+40V for +28V models
Specifications subject to change without notice.
The
NC500
(drop-in) and
500SM
(surface mount)
Series noise modules are an economical solution
for built-in test requirements. They contain
complete bias circuits and require no external
components.
The surface mount package is suitable for
mounting on microstrip. The modules produce
extremely flat output power versus frequency
characteristic that is insensitive to tempera-
ture and voltage variations.
The
NC500 Series
modules are
housed in a TO-8 metal
can, and require
0.2 to 5 mA, while
the
500SM Series
modules are
housed in a
surface mount
plastic package.
Both typically
require 5 mA and
produce a minimum of 31 dB ENR of white
Gaussian noise. The
NC510
and
510SM Series
typically require 15 mA and have higher output
with a minimum of 51 dB ENR. Like all Noise
Com products, they contain a fully characterized
noise diode that has been burned-in for 168
hours.
Typical applications for these noise modules
include built-in test equipment (BITE), signal
strength meters for cellular, PCS, CATV,
calibrators, spectrum analyzers, radar warning
receivers (RWR), and dither A/D quantization
error. Noise Com can optimize frequency range,
voltage and output levels for specific applica-
tions. Most models are available from stock.
When ordering, add the suffix "SM" to the
model number to denote the surface mount
version. If the suffix is not included, the drop-in
version will be supplied.
2 8
www.noisecom.com
Applications:
Built-in test equipment (BITE)
Signal strength meters for cellular, PCS and CATV
Calibrators
Spectrum analyzers
Radar warning receivers (RWR)
Dither A/D quantization error
Gain-bandwidth product testing
2 9
To order call 201-261-8797
NC500/500SM SERIES
COMPONENTS
NC500/500SM SERIES
MODEL FOR
MODEL FOR
MODEL FOR
FREQUENCY
MINIMUM OUTPUT
OUTPUT
I (max)
+12 V SUPPLY
+15 V SUPPLY
+28 V SUPPLY
RANGE
ENR (dB)
@ R
L
(
)
FLATNESS (dB)
(mA)
NC501/12
NC501/15
NC501
200 kHz - 500 MHz
31
50
0.5
10
NC502/12
NC502/15
NC502
200 kHz - 1 GHz
31
50
1.0
10
NC503/12
NC503/15
NC503
200 kHz - 2 GHz
31
50
1.5
10
NC504/12
NC504/15
NC504
200 kHz - 3 GHz
31
50
1.5
10
NC505/12
NC505/15
NC505
200 kHz - 4 GHz
31
50
2.0*
10
NC506/12
NC506/15
NC506
200 kHz - 5 GHz
31
50
2.5*
10
NC511/12
NC511/15
N/A
200 kHz - 500 MHz
51
50
2.0
30
NC512/12
NC512/15
N/A
200 kHz - 1 GHz
51
50
2.0
30
NC513/12
NC513/15
N/A
200 kHz - 2 GHz
51
50
2.0
30
1. Military version in compliance with MIL-E-5400T Class 2 (add suffix M).
Not available in surface mount, NC501 to NC506 Series only.
2. Add SM for surface mount. Otherwise TO-8 is standard.
* Flatness 4.0 for SM Series of these models.
NC500 Series Dimensions (inches)
NC500SM Series Dimensions (inches)
© 2018 • ICSheet
Contact form
Main page