HTML datasheet archive (search documentation on electronic components) Search datasheet (1.687.043 components)
Search field

Datasheet: FMOC7125E/S (Frequency Management)

Thru-hole Mcmos/ttl Compatible High Freq. High Freq.

 

Download: PDF   ZIP
 
NOTE : Waveforms & Test Circuits on pages 48, 49
Standard Specifications for product indicated in
color
A 0 to 70 C
B -20 to 70 C
C -40 to 85 C
D -10 to 50 C
E -10 to 60 C
F
-30 to 60 C
J
0 to 50 C
X - Custom
Temp. Range
27
1 NC or Tri-State
7 Case Ground
8 Output
14 Supply Voltage (Vdd)
Pin Function
PIN FUNCTION TABLE
FULL SIZE 14 PIN DIP
Parameter
Specification
SPECIFICATIONS
SPECIFICATIONS
PART NUMBERING SYSTEM
PART NUMBERING SYSTEM
FMOC71
FMOC71 00
00 A
A 3 S T
3 S T -
- XX
XXX.XXXXXXM
X.XXXXXXM - - CM
CM
00 - 100 ppm
50 - 50 ppm
25 - 25 ppm
20 - 20 ppm
nn - Custom Value
3 - +3.3 Vdc Supply Voltage (Vdd)
S - Tight Symmetry
(45/55%) Duty Cycle
T - Tri-State
BLANK - None Required (Std.)
Overall Frequency Tol.
Specification Options
Frequency (MHz)
HCMOS/TTL Compatible
5.0 Vdc Clock Osc.
via Multiplier
Full-Size 14 Pin DIP
Product Family
15302 Bolsa Chica St., Huntington Beach, CA. 92649
Tel.: 714-892-3234 Fax: 714-890-1832
E-mail: sales@frequencymanagement.com
www.frequencymanagement.com
1-800-800-XTAL
(9825)
GW - Gull Wing
PD - Parameter Data
CM - Custom Mark
BLANK - None Req'd.
Options
0.600
(15.24)
0.200
(5.08)
MAX.
0.515
(13.08)
MAX.
0.815
(20.7)
MAX.
1
14
0.022
(0.55)
0.300
(7.62)
0.300
(7.62)
7
8
Insulated
Stand-Offs
0.250
(6.35)
MAX.
0.022
(0.56)
FMOC71
SERIES
5.0 Vdc Clock Oscillators
14 PIN DIP
High Frequency via Multiplier*
3.3 Vdc Supply Voltage Option
HCMOS/TTL Compatible
Lower Cost*
Frequency Range
60.0 to 160.0 MHz (100MHz max @ +3.3 Vdd)
Overall Frequency Tolerance
20 ppm to 100 ppm
(Inclusive of Operating Temp., Supply Voltage, & Load)
Operating Temperature Range
0 to +70C Std. (See Temp. Range Options)
Storage Temperature
-55 to +125C
Supply Voltage (Vdd)
+5.0 Vdc (0.5 Vdc) or +3.3 Vdc (0.3 Vdc)
Supply Current (Icc)
30 mA max. @ 6 0.0to 99.9 MHz
50 mA max. @ 100.0 to 149.9 MHz
60 mA max. @ 150.0 to 160 .0 MHz
Symmetry (Duty Cycle)
40/60% Std., 45/55% Avail. (See Spec. Option S)
Output "O" Level (V
OL
)
0.4 Vdc max. (TTL)
0.5 Vdc max. (HCMOS) (0.3 Vdc max @ +3.3 Vdd)
Output "1" Level (V
OH
)
2.4 Vdc min. (TTL)
4.5 Vdc min. (HCMOS) (3.0 Vdc min @ +3.3 Vdd)
Rise and Fall Time
10 ns max. < 5 ns typical
Start Time
10 ms max. < 5 ms typical
Output Load
10 TTL / 15 pF HCMOS
Jitter (typical)
< 25 pico seconds, one sigma
Phase Noise (typical)
10 Hz
-75dBc/Hz
100 Hz
-105dBc/Hz
1kHz
-100dBc/Hz
10kHz
-90dBc/Hz
100kHz
-95dBc/Hz
1MHz
-120dBc/Hz
Pin 1 Options
No Connect (Std.)
(See Spec. Option TT below)
Tri-State (option TT)
VIH: 2.2 V or Open Enables Output
VIL: 0.8 V Disables Output
Output Disable/Enable Time: 100 nS max.
Aging @ 25C
5ppm max first year
MARKING: See Page 57, Format G
MARKING: See Page 57, Format G
Dimensions:
I n c h e s
(mm)
/ /
* All specifications for 5.0 Vdc supply voltage unless otherwise noted.
All specifications subject to change without notice.
© 2020 • ICSheet
Contact form
Main page