HTML datasheet archive (search documentation on electronic components) Search datasheet (1.687.043 components)
Search field

Datasheet: 61526 (Anaren Microwave)

Attenuators ; Size LXWXH = 1.88 X 1.55 X 0.6 ; Packaging = Aluminum Cased ; Frequency MHZ = 2000-4000 ; Power Handling Watts =

 

Download: PDF   ZIP
Anaren Microwave
Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121
Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369
Load Sensing Devices
Precision Attenuation
Controllers
Instrumentation
Attenuators
PIN Diode
Features
Model 61526 / 61536
Military Grade
Low VSWR
Flat Response
Connectors Per MIL-C39012
Outline Drawing
Note: Impedance: 50 ohms nominal. Meets MIL-E-5400 Class 3 Requirements. Additional screening available
for military and space applications. Power handling: 0.4 W @ 2 GHz. Supply Voltages: +12v @ 120 mA and -12v
@ 40 ma Max. Control Voltage: 0 to 10 volts (6dB/Volt) Typical
Electrical and Mechanical Specifications subject to change without notice.
1
Linearized models have 10,000 ohm drive impedance and 100 KHz drive bandwidth.
3
Specified to 45 dB, add 1.5 dB to 60 dB.
4
Linearized models only.
6.8.5
Applications
Electrical Specifications
Model Number
Frequency
Dynamic Range
Insert. Loss
Linearized
1
Current Control
dB Min/Typ
dB Max
Max : 1
6 1526 6 1536
2.0-4.0
60
1.9
Flatness
3
Linearity
4
Speed
VSWR
dB Max
dB Max
nanosec.
In. Loss/Atten :1
2.5
3
650
1.71/1.65
Current Controlled
NOTES:
1 DIMENSIONS ARE
INCHES & (MILLIMETERS)
2 MARKING: MARKING
SHALL BE IN ACCORDANCE
WITH ML-STD-130
3 FINISH:
EPOXY COATING PER ML-C-22750 COLOR CHIP 35180 (BLUE) PER
FED STD-595. OVER EPOXY PRIMER PER ML -P-23377
4 PRECAUTIONARY PACKAGING, HANDLING AND PROCESSING PROCEDURES
PER DOD-STD-1686. CLASS 1, AND DOD-HDBK-263, SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC, ELECTROMAGNETIC, AND OTHER ENVIRO-
MENTAL FIELD FORCES
5 WEIGHT:
3.5 OZ MAX
NOTES:
1
DIMENSIONS ARE INCHES
& (MILLIMETERS)
2
MARKING:
MARKING
SHALL BE IN ACCORDANCE
WITH ML-STD-130
3
FINISH:
EPOXY COATING PER ML-C-22750 COLOR CHIP 35180 (BLUE) PER FED
STD-595. OVER EPOXY PRIMER PER ML -P-23377
4
PRECAUTIONARY PACKAGING, HANDLING AND PROCESSING PROCEDURES PER DOD-STD-
1686. CLASS 1, AND DOD-HDBK-263, SHALL BE USED TO PREVENT DAMAGE FROM
ELECTROSTATIC, ELECTROMAGNETIC, AND OTHER ENVIRONMENTAL FIELD FORCES
5
WEIGHT:
2.8 OZ MAX
Aluminum Cased Connectorized Components
© 2019 • ICSheet
Contact form
Main page